Faber Chimney Service in Chandigarh, Mohali, Panchkula

Common Faber chimney problems we fix

Weak suction

Oil and soot build up on the filters and the impeller until the motor moves half the air it should. A strip-down clean of the baffle or mesh filters, the oil collector and the blower brings the suction back; a worn motor is replaced.

Auto-clean not working

The heating element behind the auto-clean button or the timer board fails, so oil never drains into the collector. We test the element and the PCB and replace only the part that has gone.

Touch panel or lights not responding

Grease and heat get into the touch strip and the LED driver. Usually a panel or driver swap; sometimes only a clean and a loose connector.

Loud noise or vibration

A cracked blower wheel, a motor bearing running dry, or a hood that has worked loose from the wall. We check all three before quoting a motor.

Faber models and ranges we see most

Hood CrestHood ZenithHood Tender 3DHood Glassy

Not on the list? Most Faber models share parts with one that is — call and ask.

Parts and warranty

Filters, motors and auto-clean elements are available for current Faber models. For a discontinued hood we fit a matched equivalent and say so on the bill. Our work carries our own service warranty; parts carry the maker's.

HouseTech Care is an independent multi-brand service, not Faber's authorised service centre. We use genuine parts where the maker supplies them and say so when we cannot.

Faber chimney service — frequently asked questions

No. HouseTech Care is an independent service centre for all brands, not Faber's authorised service centre and not connected with Faber. We repair Faber chimneys at your home, use genuine Faber parts where Faber supplies them and tell you before fitting one that is not. If your Faber chimney is still under Faber's warranty, call Faber's own service line first.

Both. Auto-clean handles the light oil; the filters, collector and blower still need a manual deep clean every six to twelve months, which is what most Faber calls in the tricity are about.

Yes. We are an independent multi-brand service, so warranty status makes no difference to us. If the chimney is still inside Faber's warranty we will tell you, so you can decide whether to use it instead.

A repair depends on the part. The technician confirms the amount before starting and you pay after the work.