Runs but does not heat
- Fuse, diode, capacitor and magnetron tested in order of cost
- The cheapest cause is checked first, not last
Price after checking
Microwave & OTG Repair in Pimpri Chinchwad, Pune
Starts at ₹349, visit ₹250 Same day · Pay after service
Solo, grill and convection microwaves and OTGs repaired at home where they can be, and in the workshop where they cannot. Anything carrying a magnetron is handled by someone trained for it.
Microwave in Pimpri Chinchwad
Pimpri Chinchwad is the industrial township north-west of Pune — the factories, the colonies that grew around them, and the newer towers along the Pune–Mumbai road. Old wiring and new flats, street by street.
Pimpri Chinchwad's colony houses run their microwaves on old lines, and a fuse that blows again and again or a control board that has failed is the call from here — the supply is checked before the board is replaced, because a weak line will take the new board too. The newer flats along the Pune–Mumbai road bring the ordinary faults: not heating, turntable stopped, door latch. All repaired at home where they can be.
We cover Pimpri Chinchwad as part of Pune for microwave & otg repair: the same technicians, the same prices as the rest of the city — the visit itself is ₹250. The technician confirms the amount at your door before starting, and you pay after the work.
Visiting charge ₹250 per visit.
Common faults
Sparking inside
- Usually a burnt waveguide cover
- Stop using it until this is put right
Price after checking
Turntable not turning
Price after checking
Buttons or display not working
Price after checking
Door not closing or the latch broken
- A microwave with a faulty door interlock should not be run at all
Price after checking
Loud fan or a burning smell
Price after checking
OTG not heating or heating unevenly
- Elements, thermostat and timer checked
Price after checking
Parts replaced
Magnetron replacement
Price after checking
High voltage capacitor or diode
Price after checking
Fuse or thermal cut-out
Price after checking
Turntable motor or coupler
Price after checking
Door switch or latch assembly
Price after checking
PCB or membrane keypad
Price after checking
OTG heating element
Price after checking
How it works
1Pick the jobAdd what your microwave needs from the list; every job shows its price or says it is priced after checking.
2Leave your numberWe call back to fix a time. No advance, no payment on the site.
3The technician comesAt your door in Pune, with the tools and the usual parts. The amount is confirmed before work starts.
4Pay after the workCash or UPI once the job is done and checked. A bill on request.
Microwave brands we service in Pune
We service LG, Samsung, IFB, Whirlpool, Godrej, Panasonic, Bajaj, Morphy Richards, Philips, Bosch and Haier — genuine parts where the brand still supplies them, quality equivalents where it does not, and we tell you which before fitting.
LG
Samsung
IFB
Whirlpool
Godrej
Panasonic
Bajaj
Morphy Richards
Philips
Bosch
Haier
Microwave & OTG Repair across Pune
HouseTech Care covers Pune, Maharashtra for Microwave & OTG Repair. We work across Baner, Balewadi, Wakad, Pimple Saudagar, Pimple Nilakh and 4 more localities. Most jobs fall within about 20 km of , so a same-day slot is usually possible.
Microwave & OTG Repair starts at ₹349 here — the same rate we charge across the tricity. The technician confirms the final amount at your door, including the cost of any spare part, before starting. There is nothing to pay in advance.
Pune is a different list of work from the tricity. Here we do AC service and repair, washing machines, refrigerators and microwaves — the appliance side of the house rather than the kitchen and gas side. We cover Baner, Balewadi, Wakad and Hinjewadi, Pimple Saudagar, Pimple Nilakh and Pimple Gurav, Pimpri Chinchwad and Shivaji Nagar. The quickest way to reach us in Pune is WhatsApp. As everywhere we work, the technician tells you the amount before starting and there is no advance — you pay once the job is done.
Outside Pune we also cover for the same work.
What our microwave & otg repair in Pimpri Chinchwad, Pune covers
- Runs but does not heat
- Sparking inside
- Turntable not turning
- Buttons or display not working
- Door not closing or the latch broken
- Loud fan or a burning smell
- OTG not heating or heating unevenly
- Magnetron replacement
- High voltage capacitor or diode
- Fuse or thermal cut-out
- Turntable motor or coupler
- Door switch or latch assembly
- PCB or membrane keypad
- OTG heating element
Microwave & OTG Repair in Pune — frequently asked questions
That is the magnetron circuit: the fuse, the high voltage diode, the capacitor or the magnetron itself. They are tested in order of cost, so you are not sold the dearest part first.
Stop using it and unplug it. Sparking is usually a burnt waveguide cover, which is a small part, but running it that way damages the cavity, and then the repair is not small.
Most faults, yes. A magnetron or a board sometimes needs the workshop. You are told before it leaves the house, and it comes back tested.
For a solo microwave past eight or nine years with a dead magnetron, often not, and we will say so. For a convection oven or an OTG it usually is.
Yes. Elements, thermostats, timers and the fan on convection models.
No. The latch is what stops it running with the door open. It is an inexpensive part and should be done before the microwave is used again.
We service LG, Samsung, IFB, Whirlpool, Godrej, Panasonic, Bajaj, Morphy Richards, Philips, Bosch and Haier. If your brand is not listed, call — most models share parts with one that is, and we will tell you honestly whether we can help.
Yes. We work across Baner, Balewadi, Wakad, Pimple Saudagar, Pimple Nilakh, Pimple Gurav, Pimpri Chinchwad, Shivaji Nagar, Hinjewadi. Anywhere within roughly 20 km of is a normal same-day call. If your locality is not on that list, call and we will tell you honestly whether we can reach you the same day.
Yes. Pimpri Chinchwad is inside our Pune coverage, with the usual ₹250 visit charge. Call or WhatsApp with your address and we will tell you the earliest slot.
A fuse that blows repeatedly means a fault downstream — often the capacitor, the diode or a shorted magnetron — or a bad supply. The technician finds which before replacing the fuse again.